Two subscriptions, one blind spot: what two tools really cost
Software for cash flow forecasting plus a stock planner looks cheap. Price the weekly reconciliation labour and the two tool stack usually is not.

You know the feeling. You're doing the books at 11pm and the number in your cash flow software for cash flow forecasting doesn't match what your inventory planner says you've spent. So you open a spreadsheet, re-key a few purchase orders, and try to work out which version of the truth is right. The two subscriptions looked reasonable when you signed up. The reconciliation between them is where the real cost sits.
This post is a cost and labour comparison of running a standalone cash flow tool alongside an inventory planner, not a feature checklist. We will walk through what each tool does well on its own, then look at the expensive parts: purchase orders that never reach the forecast, payment terms only one system knows about, and the weekly hour spent deciding which number to believe. We will put a rough price on that labour over twelve months and look at when two tools still make sense. You will finish with a clearer view of what the two tool stack really costs before you renew anything.
The subscriptions are the cheap part, the reconciliation is the cost
Two subscriptions are a visible, predictable line on the bank statement. The real cost is the hours spent making the two systems agree with each other, and nobody invoices you for those.
This is a cost and labour comparison, not a feature comparison. Features get one honest section later so the money argument can have the rest.
We will price duplicate subscriptions, manual re-keying of purchase orders, payment terms that only one system knows, and the weekly hour spent deciding which cash figure is right. If you run a Shopify or DTC brand holding stock, already pay for a cash flow forecasting tool and an inventory planner, and quietly suspect the stack costs more than the invoice says, this is your section. Cash flow disruption is widespread and persistent for small businesses; the labour behind that disruption is what we are counting. Check the billing and subscription terms on both tools before you renew, because the renewal date is when the cheap-looking stack gets expensive.
What a standalone cash flow tool and an inventory planner get right
None of this is an argument that either tool does its own job badly. A dedicated cash flow forecasting tool earns its subscription: a clean rolling view of the bank, scenario toggling and balance imports that a stock tool was never built to handle. The same goes for a standalone inventory planner. Demand forecasts, reorder points and lead times tied to real supplier data are hard to rebuild in a spreadsheet, and a brand selling across several channels leans on them, as our guide to inventory planning for ecommerce sets out.
The seam is the problem. The cash tool models money, the planner models units, and neither was designed to read the other's data model. As of October 2026, Float, Prediko and Inventory Planner each publish list prices on their own pricing pages (Float, Prediko, Inventory Planner). Treat those as vendor sources, not benchmarks. Then notice the line on no pricing page: the person, usually the founder, moving data between the two every week.
Purchase orders that never reach the cash forecast
Here is an illustrative scenario, not a measured one. In week 3 you raise a reorder in your inventory planner, using a reorder point you set per SKU. It lands in week 9, paid on delivery. Nobody re-keys it into the cash flow forecasting software. The forecast shows a comfortable month. The bank balance is lower by exactly that order plus freight.
The cause is structural, not careless. The planner holds commitments. The cash tool holds balances. No field in either system is responsible for carrying one into the other. So the patch is manual: export to a spreadsheet, retype into the other tool, remember, repeat every month, for every supplier and every open order.
This is a described failure mode, not a measured one. No study or percentage is being quoted here.
Payment terms only one system knows about
Purchase orders are only one way the two systems fall out of step. The other is payment terms.
Picture a supplier agreement: 30 per cent deposit on order, balance on 60 day terms. It gets agreed in an email, typed into the planner so reorder points reflect the lead time, and never entered anywhere the cash forecast can see. The forecast then runs light or heavy for a whole quarter by the deposit and the balance, and the error compounds with every new term you negotiate.
So ask yourself where your terms actually live right now. A spreadsheet, a supplier email thread, the planner, the accounts package? More than one place means drift.
After sales, payment terms are the biggest lever on a cash forecast, and they are the input most likely to be held in only one tool. Sound cash flow forecasting for ecommerce brands depends on terms being visible to the system doing the forecasting.
Count how many of your live supplier terms are recorded in both systems. That number tells you how wide the gap already is.
The weekly hour spent deciding which number to believe
You have just checked where your supplier terms live, and found more than one version. Now watch the hour that follows. At 11pm the laptop shows two dashboards side by side: the cash tool's closing balance and the planner's view of commitments. They disagree. You reconcile them by eye, over a cup of tea, and close the laptop without changing either system.
An hour feels trivial. It is not. It recurs every week, it is done by the most expensive person in the business, and it produces nothing you can sell.
The cost nobody counts comes later. After a few months you stop trusting either figure and start deciding stock off the bank balance alone. That is how one good month turns into an overstock problem. This is what the disconnect does: it hides the links between cash and stock.
Nobody searching for software for cash flow forecasting asks about this hour, because no comparison page mentions it. The subscriptions are the price of entry. This hour is the subscription you did not know you were paying.
Putting a number on the gap over twelve months
Built hours into a cash flow template? You will recognise this shape.
Weekly reconciliation hours x loaded hourly rate x 52 = annual cost of the gap
Worked example, assumptions not benchmarks: 3 hours a week at a loaded £40 an hour gives £6,240 a year before a subscription is counted. Lighter case, 2 hours at £25, gives £2,600. Every input is an assumption; replace with yours.
| Line item | Two tool stack | One tool stack | Notes |
|---|---|---|---|
| Subscriptions | Two invoices | One invoice | Visible on the statement |
| Re-keying time | Weekly | None | Purchase orders entered once |
| Reconciliation time | Weekly | None | The gap this piece prices |
| One wrong stock decision | Possible | Less likely | Same forecast and stock view |
| Annual total | Add all rows | Add all rows | Use your own hours |
The table cannot show two renewals, two price rises and two admin sets arriving regardless of reconciliation, so the stack has a floor cost the one tool lacks. No survey or vendor published hours sit behind this model; the arithmetic matters only with your numbers.
When two tools still make sense
That model only bites when the stack is actually costing you hours. Plenty of brands run two tools and get real value from both. If you have a dedicated demand planner, a finance hire and clean data flows between them, a separate cash flow tool and inventory planner can each do a better job than a single compromise would. This piece is not arguing otherwise.
Timing matters too. Pulling a working inventory planner out mid season, before peak, is a cost, not a saving. The switch gets paid for in founder hours as well as subscriptions, and those hours are scarce in October.
There is a narrow case where the overlap is small enough to ignore: the cash tool exists purely for board reporting, and stock decisions happen entirely elsewhere.
So give yourself two tests. Does one named person own the reconciliation? Does it take under an hour a month? Two yes answers mean the stack is fine, and you can stop reading.
If nobody owns the reconciliation, you do not have two tools. You have one tool and one expensive guess. If you want to go deeper, read our guide to cash flow forecasting software for stock holding brands.
What one tool looks like when the forecast sees the stock
That guess disappears when the cash forecast and the stock plan share the same record. Cushion is built for Shopify and DTC brands that hold stock, reading bills, balances and payment terms so cash planning and stock planning sit in one place. Enter a purchase order once and it informs both the cash forecast and the stock plan, so the bank view and the stock view show the same number. The weekly reconciliation stops existing rather than getting faster. Connections are read-only to Shopify, Xero and QuickBooks.
Treat that as a hypothesis, not a promise. Run one week of reconciliation in Cushion alongside your current stack, compare the hours, then decide. If you are replacing a closed tool, Fluidly shut down in 2023. Here's what to use instead explains where those users went. Run your own labour model with the calculators, and Join the waitlist when you are ready.
What to do with this before you renew
Before the renewal email lands, run the test on your own numbers. For two weeks, log every minute of reconciliation: the export, the retype, and the time spent staring at two balances. Multiply the weekly total by your loaded rate and 52.
Then write that annual figure on paper, next to both subscription invoices, in one column. That column is the decision, not this article.
Note both renewal dates, and write down which tool you would keep if reconciliation were handled for you. The answer tells you which one is doing real work.
Next, trace one live purchase order from planner to forecast to bank statement. If the trail breaks anywhere, you have found the blind spot.
Then run your own numbers through our calculators or go deeper on cash flow forecasting for stock holding brands and stock planning and cash.
FAQs
Should I count my own time if I don't take a salary?
Yes. The model uses a loaded rate, not a payslip, and £40 an hour is an assumption you can replace.
What if my bookkeeper does the reconciliation?
Price their hours at their invoice rate. The formula and the annual figure stay exactly the same.
Could tidying up both tools fix it?
For a few weeks at most. The seam reopens the next time a supplier term changes or a reorder is raised.
Which renewal should I decide before?
The earlier one, because you are judging both invoices together, not one renewal in isolation.
Is the two tool stack always more expensive than one tool?
Short answer: no. The two-tool stack is more expensive when nobody owns the reconciliation, because the gap becomes unbilled hours and quiet guessing. It is cheaper when one named person keeps the two systems agreeing in under an hour a month, and that ownership is real.
The subscription line is not the deciding number either way. Price the hours first, then compare the invoices. If the monthly reconciliation is owned and short, keep the stack. If it is not, the subscriptions were never the expensive part.
How many hours a week does reconciliation really take?
There is no published figure for this, and any blog that gives you one is guessing. Measure your own for two weeks instead. Start the clock when you open both tools and stop when you have one number you believe. Count the export, the retype into the second system and the checking. Founders usually count the checking and forget the re-keying, which is often the longer job. Note the total honestly, including the day you give up and use the bank balance. That fortnight gives you a number worth putting into the formula later.
Do I have to cancel my inventory planner to fix this?
Not automatically. If your planner is genuinely doing multichannel demand forecasting and someone is actually minding it, keep it and fix the handover to the cash tool instead. Give that handover one owner, one agreed export or field, and one weekly check that open purchase orders and payment terms reach the forecast. The problem is the seam between the two systems, not either tool on its own, so closing that seam is a valid first move. If nobody owns the handover, the planner is not the thing to cancel first. The reconciliation is.
What should I ask a cash flow forecasting software vendor before switching?
Before you switch, ask two questions that most demos skip. First: what does it read, from which systems, and does the connection only read? Bills, balances and supplier payment terms should all come in, ideally through read-only connections to your accounts and store. Second: what happens to an open purchase order the day after you raise it? Does it appear in the cash forecast and the stock plan automatically? Then ask who is responsible when those two views disagree. If the answer is you are, you have found the same seam in a new place. Run that check before you sign anything.
Conclusion
The subscription fees are not the real cost. The real cost is the seam between the two tools: the re-keying, the weekly hour spent deciding which number to believe, and the purchase orders that never reach the cash forecast. That gap is usually larger than either renewal, and it compounds quietly over twelve months.
If your inventory planner earns its keep, keep it, but give the handover to the cash forecast one owner, one agreed field, and one weekly check. If nobody owns that seam, the reconciliation is the thing to fix first. One tool where the cash forecast sees the stock and the stock plan sees the bank closes it properly.
Before you renew either subscription, run the two week test from this post: log the checking, log the re-keying, and put a real number on the gap. That number is your next step. It will tell you whether to mend the seam or remove it.



